SB150i Nitrous Kit Suitable for most injected engines with a single throttle body

The Street-Blaster 150i is a frequent choice for fuel injected engines and benefits from numerous unique features as standard equipment, which offer substantial advantages over all other brands.

Click here for a comparison of WON vs other brands.

Click here to see the independant report and test results of a basic WON nitrous system compared to a generic kit, which is representative of all alternative brands

Features;

• Lifetime guarantee.  
• Crossfire injector.
• Billet alloy Pulsoids which well never wear out, guaranteed for life.
• Micro bore nylon hose for maximum efficiency.
• EU specification nitrous bottle with FlowMax valve & SPRV.
• Laserlite QD nitrous bottle quick release mounting system. 
  

If you want a simple to fit, well-priced system that delivers maximum reliability and power; the Street-Blaster 150i has been developed by WON with you in mind. Having just one injector it is our lowest priced system and also the easiest and quickest to fit. This system is for street use but can be upgraded to race use by replacing our nylon pipe with our braided hose. Whether it’s purely for an adrenaline fuelled thrill or the more serious use of gaining a competitive edge, the Street-Blaster 150i can deliver a boost of up to 150bhp, whenever you need a burst of acceleration. Utilising the same high-quality components as our ultimate race, Pro-Series systems the Street-Blaster 150i offers peace of mind and impressive results at a very competitive price. 

Our super high pressure nylon supply pipe (manufactured specifically for WON), is always the best option for those who only require modest power increases (between a maximum of 75 to 150 HP depending on the length of the car and therefore the pipe length) and who live in mild climates. However, if the full potential capability of the system is required on a long car and/or the system has to comply with outdated race regulations and/or for use in a hot climate, braided hose would be required (which can be selected from the drop-down menu). 

When opting for braided hose it is also beneficial to add one of our purge systems to your order (also available from one of the drop-down menus above).

This nitrous kit is suited to, but not limited to:

All VW Water Cooled 4 to 6 Cyl Injected Engines (Golf 2.0 16V / 1.8T / VR6 , Polo etc.) Click HERE for TFSI specific systems

Most Ford 4-Cyl Injected Engines (Focus , Fiesta, etc.)

Most V8 engines with single throttle body or single air intake (although a power restriction may apply with this particular system)

Most Vauxhall/Opel 4-Cyl Injected Engines ( 2.0 XE / LET, Corsa, Vectra etc.)

All Subaru 4 to 6 Cyl Injected Engines ( Impreza, Legacy )

Most V8 engines (although a power restriction may apply with this particular system)

Most Mitsubishi 4 to 6 Cyl Injected Engines ( Lancer / Evolution , FTO, GTO)

All Honda 4-Cyl Engines  ( Civic, Integra)

Most BMW 4-Cyl Injected ( 3 series)

All Mercedes 4-Cyl Injected Engines ( C-Class etc.)

All Seat 4-Cyl Injected Engines (Leon, Ibiza, Cupra etc.)

Most Audi 4-Cyl Injected Engines (A3, A4) Click HERE for TFSI specific systems

All Toyota 4-Cyl Injected Engines (Vitz/Yaris, Celica etc.)

Most Nissan 4-Cyl Injected Engines (200 SX , Sunny, Silvia,  etc.)

Most Renault 4-Cyl Injected Engines (1.8 / 2.0 Clio, Megane etc.)

Whether you need or just want to experience the WON buzz, a Street-Blaster 150i will deliver - order online NOW!

Please note that whilst the picture shown on this page may not be an exact representation of the system's contents, the parts list below is.

Parts Included:

·        1 x Crossfire Injector (spacer & retainer).

·        1pr x Billet alloy Pulsoids with inlet & outlet fittings & polished stainless mounting plate(s).

·        1 x 5 lb black coated bottle with Max-flow Valve.*

·        1 x Laserlite polished stainless steel QD bottle mounting system.

·        1 x Fuel adapter – standard T piece or various to suit application.

      ·        5m of 5mm high pressure micro bore nylon nitrous supply pipe.

      ·        2m of 5mm nylon fuel supply pipe.

      ·        0.5 m of 4mm blue nylon supply pipe from Pulsoid to injector.

     ·         0.5 m of 4mm red nylon supply pipe from Pulsoid to injector.

      ·         5 x 4mm retaining nuts and olives for nylon lines.

      ·         5 x 5mm retaining nuts and olives for nylon lines.

      ·        1pr x Metering Jets (suitable for your application.

       ·          1 x Throttle activated micro switch & SS bracket.

·        1 x Arming switch with aircraft style cover.

·        1 x Electrical connectors & wire pack.

·        4 x stickers.  

·        Fitting instructions.

*Bottle shipped empty

"ALL PRICES ARE SUBJECT TO VAT INSIDE THE EU ZONE"