Details
THE ULTIMATE IN NITROUS SYSTEM DESIGN AND TECHNOLOGY!
The Street-Blaster 150D6 is a frequent choice for diesel engines and benefits from numerous unique features as standard equipment, which offer substantial advantages over all other brands of nitrous systems.
The Street-Blaster 150D6 is a dry, nitrous only direct port system that has been designed specifically for 5 & 6 cylinder diesel applications.
The Street-Blaster 150D6 has the potential to increase the power of your engine by up to 150 horsepower (possibly more), depending on the type of vehicle and/or choice of supply hose (WON nylon or braided SS hose).
Our super high pressure nylon supply pipe (manufactured specifically for WON), is always the best option for those who only require modest power increases (between a maximum of 75 to 150 HP depending on the length of the car and therefore the pipe length) and who live in mild climates. However, if the full potential capability of the system is required on a long car and/or the system has to comply with outdated race regulations and/or for use in a hot climate, braided hose would be required (which can be selected from the drop-down menu).
When opting for braided hose it is also beneficial to add one of our Nitrous Purge Systems to your order.
Click here for a comparison of WON vs other brands.
UNRIVALED list of standard features:
- Lifetime Warranty.
- Anodised billet alloy Pulsoids.
- Pulsoids that NEVER wear out, guaranteed.
- Extruded alloy bottle bracket.
- Anodised billet alloy bottle valve body.
- Anodised billet alloy valve handwheel.
- Stainless steel fittings.
- Polished SS component mounting bracket.
- NO purge required.
- 24/7 tech support.
Parts Included: - Our famous billet alloy X-10 Nitrous Pulsoid with SS fittings and laser cut mounting plates.
- 1 x 5lb Black Coated Bottle w/ maxflow valve(bottle shipped empty).
- 1 x Extruded alloy bottle bracket w/ stainless steel straps.
- 1 x Throttle microswitch w/ bracket. TPS available for an extra charge.
- 5m of 5mm high pressure nylon nitrous supply line.
- 2.5m Nylon supply line from pulsoid to injector.
- 16 x Backing nuts and olives for nylon lines.
- 6 x Venom injector (with spacer & retainer).
- 1 x 6 Way single distribution bloclk
- 1 x Arming switch w/ aircraft style cover.
- 1 x Electrical connectors & wire pack.
- Fitting instructions & stickers.
- 25, 50 and 75 BHP metering jets.
*NB the image used may not be a true representation of the parts included, but the parts list is.
SB150D Direct Port Installation Manual
- "ALL PRICES ARE SUBJECT TO VAT INSIDE THE EU ZONE"