Nitrous Purge Kit

WON Street-Blaster systems are designed for maximum efficiency and as a consequence there is minimal gas that may need purging from the supply pipe, therefore a purge kit is far from being essential. However if you want the sharpest possible response or you want to show the world that you’re ready for some serious action, then adding our purge kit would do the job and ensure that your engine receives dense liquid nitrous the instant you fire the system for optimum acceleration.

Should you be using a nitrous system with braided supply hose then it’s a whole different matter, as a purge kit becomes an essential part of a nitrous system, if you wish to achieve optimum performance. A purge solenoid can also be used to empty the supply line when the system is not to be used for a period of time, to ensure no nitrous leaks past the solenoid seal in to the engine, as unlikely an event as that is with Pulsoids.

Our purge kits use the same high quality solenoid that we use in our main stream nitrous systems, to ensure there is no risk of system failure due to a purge solenoid failure. 

To ensure the purge system will connect to your existing hose and solenoid you’ll need to choose the correct fitting from the following options;

Option 1 – 1/8 BSPT (male) to 1/8 BSPT (male) will provide a direct connection between the nitrous solenoid and the purge solenoid. Awaiting link

Option 2 – 1/8 BSPT (male) to 1/8 BSPT (swivel female) will provide a more flexible direct connection between the nitrous solenoid and the purge solenoid. Awaiting link

Option 3 – 1/8 BSPT (male) to 5mm (female) for use with 5mm nylon line applications for remote mount purge use.  Click here for fitting

Option 4 – 1/8 BSPT (male) to 1/8 BSP (male) for use with WON spec Dash 3 braided hose for remote mount purge use. Awaiting link

Option 5 – 1/8 BSPT (male) to 3AN (male) for use with US spec Dash 3 braided hose for remote mount purge use. Awaiting link

Option 6 – 1/8 BSPT (male) to 4AN (male) for use with US spec Dash 4 braided hose for remote mount purge use. Click here for Fitting

"ALL PRICES ARE SUBJECT TO VAT INSIDE THE EU ZONE"