Free Custom Magento Theme
Welcome to the Wizards of NOS

SB150D4 - 4 Cyl Direct Port Diesel Car Nitrous Kit

Be the first to review this product

Availability: In stock

£525.00

Quick Overview

Nitrous System designed for diesels>

* Required Fields

£525.00

SB150D4 - 4 Cyl Direct Port Diesel Car Nitrous Kit

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

THE ULTIMATE IN NITROUS SYSTEM DESIGN AND TECHNOLOGY! 

A Direct Port Dry Nitrous System designed for diesels!

Click here for a comparison of WON vs other brands.

UNRIVALED list of standard features.

  • Lifetime Warranty.  
  • Anodised billet alloy Pulsoids.
  • Pulsoids that NEVER wear out, guaranteed.
  • Extruded alloy bottle bracket.
  • Anodised billet alloy bottle valve body.
  • Anodised billet alloy valve handwheel.
  • Stainless steel fittings.
  • Polished SS component mounting bracket.
  • NO purge required.
  • 24/7 tech support.

    Specs: Pulsoids (solenoids)
  • Only solenoids designed and built to pulse accurately and reliably.
  • Cooler running with more reliability.
  • Optimum port location for greater flow & maximum power to size ratio.
  • Matched hi-tech thermo plastic seat and plunger seal for ZERO wear.
  • Adjustable seat height to minimize lift for optimum response to PW.
  • Our rapid response coil for instant reaction to PWM, essential for progressive power.

    Parts Included:
  • Our billet alloy X-10 Nitrous Pulsoid with SS fittings and laser cut mounting plates.
  • Metering Jet (3 initial jets that range per application).
  • 1 x 5 lb. bottle w/ maxflow valve(bottle shipped empty).
  • 1 x Extruded alloy bottle bracket w/ stainless steel straps.
  • 1 x Throttle microswitch w/ bracket. TPS available for an extra charge.
  • 5M of 5mm high pressure nylon nitrous supply line.
  • 0.5M Nylon supply line from pulsoid to injector. 
  • 6 x Backing nuts and olives for nylon lines.
  • 1 x Venom injector (with spacer & retainer).
  • 1 x Arming switch w/ aircraft style cover.
  • 1 x Electrical connectors & wire pack.
  • Fitting instructions & stickers.
  • 25, 50 and 75 BHP metering jets. 

    This is a DRY system intended for diesel applications only. Unlike petrol engines, diesels can't be fitted with wet nitrous systems (which add the extra fuel with the nitrous in the manifold), because it would cause the engine to stall or run very poorly. Therefore all diesels must be fitted with a dry nitrous system which relies on additional fuel being added through the existing fuel injection system. On most modern diesels it is now possible to have your ECU remapped to deliver more fuel to achieve this. However, that will cause your engine to run richer than normal at full throttle when the nitrous is not in use, therefore a unit that can be switched to deliver more fuel only when the nitrous system is activated is a better option. 

    Note: As standard the system is supplied with nylon, 5mm OD high pressure nitrous supply pipe, which keeps undesirable gaseous nitrous to a minimum. Consequently you are saved the expense of adding a purge kit to the system.
    Braided hose can be chosen from the drop-down menu, but is only advisable for those living in hot countries where temperatures regularly exceed 30 degrees or those wanting more than 150bhp. A purge system is also advisable for optimum performance.

    Note: This system has the potential to increase the power of your engine by up to 150 horsepower. However each engine varies on power output capabilities depending on many factors, so the total power achievable can vary.

  • SB150D Installation Manual

    "ALL PRICES ARE SUBJECT TO VAT INSIDE THE EU ZONE"
  • Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.