SB150i2 Nitrous Kit suitable for most engines with 2 throttle bodies*

The Street-Blaster 150i2 is a frequent choice for a direct port system suited to fuel injected engines with 2 throttle bodies (many 'V' engines) and benefits from numerous unique features as standard equipment, which offer substantial advantages over all other brands. 

Click here for a comparison of WON vs other brands.

Click here to see the independant report and test results of a basic WON nitrous system compared to a generic kit, which is representative of all alternative brands.

Features;

• Lifetime guarantee.
• Crossfire injectors.
• Billet alloy Pulsoids.
• Micro bore nylon hose for maximum efficiency.
• EU specification nitrous bottle with FlowMax valve & SPRV.
• Laserlite QD nitrous bottle mounting system.

If you want a simple to fit, well priced system that delivers maximum reliability and power; the Street-Blaster 150i2 has been developed by WON with you in mind. This system is for street use but can be upgraded to race use by replacing our nylon pipe with our braided hose. Whether it's purely for an adrenaline fuelled thrill or the more serious use of gaining a competitive edge, the Street-Blaster 150i2 can deliver a boost of up to 150bhp, whenever you need a burst of acceleration.  Utilising the same high-quality components as our ultimate race, Pro-Series systems the Street-Blaster 150i2 offers peace of mind and impressive results at a very competitive price.

Our super high pressure nylon supply pipe (manufactured specifically for WON), is always the best option for those who only require modest power increases (between a maximum of 75 to 150 HP depending on the length of the car and therefore the pipe length) and who live in mild climates. However, if the full potential capability of the system is required on a long car and/or the system has to comply with outdated race regulations and/or for use in a hot climate, braided hose would be required (which can be selected from the drop-down menu). 

When opting for braided hose it is also beneficial to add one of our Nitrous Purge Systems to your order.

Whether you need or just want to experience the WON buzz, a Street-Blaster 150i2 will deliver - order online NOW!

This nitrous kit is suitable for (but not limited to) the following:

Nissan V6 Injected Engines (300ZX , 350Z etc.)

Ford  V6 injected Engines ( Cortina, Granada etc.)

Vauxhall V6 Injected Engines ( Calibra, Vectra )

VW V6 Injected Engines (VR6) ( Golf etc)

Audi V6 Injected Engines (A4 , RS4 etc.)

Mercedes V6 Injected Engines ( C-class , E-class etc.)

Jaguar Injected V12 Engines (XJS etc)

Please note that whilst the picture shown on this page may not be an exact representation of the system's contents, the parts list below is.

Parts Included:

·        2 x Crossfire Injector (spacer & retainer).

·        1pr x Billet alloy Pulsoids with CNC machined SS fittings and laser cut mounting plates.

·        1 x 5lb Black Coated Bottle with Max-flow Valve.*

·        1 x Laserlite polished stainless steel QD bottle mounting system.

·        2 x 4mm ‘Y’ pieces

·        1 x Fuel adapter - varies per application.

·        1 x Throttle activated micro switch & bracket (electronic TPS upgrade available for an additional charge).

·        1 x Arming switch w/ aircraft style cover.

·        1 x Electrical connectors & wire pack.

·        5M of 5mm high pressure micro bore nylon nitrous supply pipe.

·        1M of 4mm nylon fuel supply pipe.

·        1M of 4mm nylon supply lines from Pulsoids to injector.

·        16 x 4mm retaining nuts and olives for nylon lines.

·        3 x 5mm retaining nuts and olives for nylon lines.

·        1pr x Metering Jets (suitable for your application)

·        4 x stickers  

·        Fitting instructions & stickers

*Bottle shipped empty

SB150i2 Installation Manual

"ALL PRICES ARE SUBJECT TO VAT INSIDE THE EU ZONE"