Contact Us

SB150D6 - 6 Cyl Direct Port Dry Car Nitrous Kit

Be the first to review this product

Availability: In stock


Quick Overview

The Street-Blaster 150D6 is a dry, direct port nitrous system suitable for most 6 cylinder, injected engines with a programmable ECU, capable of delivering enough additional fuel to match the nitrous delivery.  

* Required Fields



Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • SB150D-6



The Street-Blaster 150D6 benefits from numerous unique features as standard equipment, which offer substantial advantages over all other brands of dry nitrous systems.

Before choosing a Street-Blaster 150D6 or any other dry system, please consider the following;

  • Although the system is called 'dry' it is still necessary to add extra fuel to your engine, when the nitrous system is activated.  Injecting nitrous oxide only produces extra power by allowing more fuel to be burnt.
  • To get significant and safe results you will need to add extra fuel via a fully mapable ECU that can switch between 2 maps and you may also need to fit bigger fuel injectors. 

The Street-Blaster 150D6 has the potential to increase the power of your engine by up to 150 HP. However, each engine's power output capabilities and total power achievable can vary depending on many factors.

If you want a simple to fit, value for money system that delivers maximum reliability and power; the Street-Blaster 150D6 has been developed by WON with you in mind. This system is for street use but can be upgraded to race use by replacing our nylon pipe with our braided hose. Whether it’s purely for an adrenaline fuelled thrill or the more serious use of gaining a competitive edge, the Street-Blaster 150D6 can deliver a boost of up to 150bhp, whenever you need a burst of acceleration. Utilising the same high-quality components as our ultimate race, Pro-Series systems the Street-Blaster 150D6 offers peace of mind and impressive results at a very competitive price. 

The Street-Blaster 150D6 has the potential to increase the power of your engine by up to 150 horsepower. However, each engine's power output capabilities and total power achievable can vary depending on many factors.

Please note that whilst the picture shown on this page may not be an exact representation of the system's contents, the parts list below is.

Click here for a comparison of WON vs other brands.

Click here to see the independant report and test results of a basic WON nitrous system compared to a generic kit, which is representative of all alternative brands.

UNRIVALED list of standard features:

  • Lifetime Warranty.  
  • Anodised billet alloy Pulsoids.
  • Pulsoids that NEVER wear out, guaranteed.
  • Extruded alloy bottle bracket.
  • Anodised billet alloy bottle valve body.
  • Anodised billet alloy valve handwheel.
  • Stainless steel fittings.
  • Polished SS component mounting bracket.
  • NO purge required.
  • 24/7 tech support.

    Parts Included:
  • Our famous billet alloy X-10 Nitrous Pulsoid with SS fittings and laser cut mounting plates.
  • Metering Jet (3 initial jets that range per application).
  • 1 x 5 lb. bottle w/ maxflow valve(bottle shipped empty).
  • 1 x Extruded alloy bottle bracket w/ stainless steel straps.
  • 1 x Throttle microswitch w/ bracket. TPS available for an extra charge.
  • 5m of 5mm high pressure nylon nitrous supply line.
  • 2.5m Nylon supply line from pulsoid to injector. 
  • 16 x Backing nuts and olives for nylon lines.
  • 6 x Venom injector (with spacer & retainer).
  • 1 x 6 Way single distribution bloclk
  • 1 x Arming switch w/ aircraft style cover.
  • 1 x Electrical connectors & wire pack.
  • Fitting instructions & stickers.
  • 25, 50 and 75 BHP metering jets. 

*NB the image used may not be a true representation of the parts included, but the parts list is.

As standard the system is supplied with nylon, 5mm OD high pressure nitrous supply pipe, which keeps undesirable gaseous nitrous to a minimum. Consequently you are saved the expense of adding a purge kit to the system.
Braided hose can be chosen from the drop-down menu, but is only advisable for those living in hot countries where temperatures regularly exceed 30 degrees or those wanting more than 150bhp. In which case, a purge system is also advisable for optimum performance. 

SB150D Direct Port Installation Manual


Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Get 5% Off now!

Customer Survey

Grab yourself 5% off your next order! Just enter your email and fill out our short survey to receive your voucher code.

             Poor 1 2 3 4 5 Excellent

Product Quality
Unsure which system
Will order later
Checkout Problem

Need more information? We have dedicated technical staff always ready to assist. Please call or email us on

Yours Sincerely, The Wizards of NOS Team