SB25 Single Cylinder Bike Nitrous Kit

Wizards of NOS SB25 Single Cylinder Bike Nitrous Kit

The Street-Blaster 25 is by far the simplest yet most effective system on the market, which is specifically designed for single cylinder motorcycles. The distinctive feature of the Street-Blaster 25 is that it doesn't need a fuel pump, which simplifies the fitting and increases reliability of the systems use.

No other system has such a desirable combination of low price, ease of fitting, user friendliness and superior performance. Despite the low price, this system still benefits from the same list of unique ultra high quality components as our Street-Blaster 150Bi. The Street-Blaster 25 has been designed to fit a stock street bike without any major modifications and as a result can often be fitted without removing more than the fuel tank, in less than half the time of other kits. 

The WON team have put a great deal of thought into the ease of fitting, performance and cost when developing this unique system, to make sure it ticks all the right boxes for you and your bike. If you want the safest extra 25 hp available from a nitrous system, then why search any further only to find a more difficult to fit, more expensive and less effective system, when you’ve already found the best in all respects? 

· Lifetime Warranty on all components.

· Anodised billet alloy X-10 Pulsoids that will never wear out, guaranteed.

· Anodised billet alloy bottle valve. 

· CNC machined stainless steel Venom injectors.

· Polished stainless steel component mounting brackets.

· NO purge required.

· 24/7 tech support.

Parts Included:

· A pair of anodised billet alloy X-10 Pulsoids with CNC machined SS fittings & laser cut polished SS mounting plates.

· 1 x  12oz. bottle with anodised billet alloy valve (bottle shipped empty). Bottle(s) MUST be mounted upside down with the valve at the bottom

· 2 x laser cut polished stainless steel bottle mounting brackets.

· 1 x anodised billet alloy fuel "T" piece with stainless steel barbs.

· 1m of 4mm ultra high pressure nylon nitrous supply line.

· 0.5m of 5mm nylon fuel supply pipe. 

· 0.5m of 4mm low pressure nylon fuel supply line from Pulsoid to injector.

· 0.5m of 4mm low pressure nylon nitrous supply line from Pulsoid to injectors.

· 7 x 4mm stainless steel securing nuts (and olives) for nylon lines.

· 3 x 5mm stainless steel securing nuts (and olives) for nylon lines.

· 1 x CNC machined stainless steel fuel Venom injector (with spacers & retainers).

· 1 x CNC machined stainless steel nitrous Venom injector (with spacer & retainer).

· 1 x arming switch.

· 1 x horn push conversion kit (switch & relay) or throttle operated micro switch with bracket.

· A pair of suitably sized metering jets.

· 1 x Electrical connectors & wire pack.

· Fitting instructions & stickers.

"ALL PRICES ARE SUBJECT TO VAT INSIDE THE EU ZONE"